Dongfeng 4x2 12CBM Road sweeper Trucks

Product DescriptionRelated Products

General	Truck Brand	Dongfeng
	Capacity	8+4CBM
	Total Weight	15900kg
	Curb Weight	9045kg
	Max Speed	98KM/hour
	Total Size(LxWxH)	7630x2500x3120 (mm)

Cab	Model	DF 153
	Brand	Dongfeng
	Driving Type	left
	Seats	3
	Air condition	Yes
	Color
	Other
Chassis	Model	EQ1141KJ
	Manufacturer	Dongfeng
	Drive Type	4*2
	Axles number	2
	Wheel Base	4500mm
	Axle Load F/R	5T/10T
	Gear box	Small 8 Speed
	Clutch
	Steering	Power assistant
	Frame	280mm，2 Layer
	Tires	10.00R20，6Pcs

Engine	Model	B190-33
	Manufacturer	Dongfeng Commines
	Type
	Fuel	diesel
	Horse Power	190HP
	Max Power(kw)	140kW
	Emission standard	Euro 3
	Displacement	5900cc

Body	Garbage Tank Volume	8CBM，Stainless Steel
	Water Tank Volume	4CBM
	Sweeper brushes	4 Pcs，Sanyo Motor
	Partical Size	φ120mm
	Rear sucker
	Sweep Speed	5-30km/h
	Max.Cleaning Width	3.3m
	Max.Sweep Capacity	70000㎡/h
	Sweeping Efficiency	95%
	Tipper angle	45
	Standard Equipment	1> Equipped with 4 sweeping brush, Cummins 140 hp deputy engine; Famous motor; French control switch; Joint venture solenoid valve group; Maintenance-free self-separate clutch; Maintenance-free fan; Stainless steel water tank and dustbin; Rear LED arrow lights, manual pump for emergency system. 2> Maximum sweeping width 3.2 m, inhaled sizeφ120 mm 3> Optional: monitoring, sprinkler function, self-cleaning function for dustbin.（Additional Cost ）

Function Description:
Center 4-sweepers, rear suction cup, Sanyo motor, Cummins auxiliary engine, Schneider control switch, Hypros solenoid valve group, stepless speed automatic clutch, maintenance-free centrifugal fan, stainless steel dustbin, Northstar electronic water pump, dustbin lift Dump, tail LED arrow light, manual pump emergency system. Optional front flush and rear sprinkler, dustbin self-cleaning function, reversing image operation monitoring, front snow shovel, snow sweep roll.
The road sweeper can not only clean the garbage, but also perform dust removal and purification on the air medium on the road to ensure that the road is clean and tidy and prevent dust from flying.
The arrangement of cleaning device and nozzle adopts the structure layout of "center four disk brush + rear nozzle". The cleaning device has the function of automatic avoidance and protection in case of obstacles, and the floating nozzle.
The inner of the trash tank adopts a double-layer structure. The inner layer is made of stainless steel, which is corrosion-resistant. The water tank and sewage tank are also made of stainless steel. The discharge angle above 60 °, plus the smooth stainless steel liner, is non-sticky, easy to discharge and very easy to clean.

1. Use suction-sweep mixing method to collect garbage, wet dust removal, electro-hydraulic control, hydraulic tipping operation to clean the road.
2. The auxiliary engine is used to drive the fan and hydraulic system to ensure that it can continue to work during driving and the continuity of the cleaning process.
3. It adopts the structure arrangement of “four-disc brush + rear nozzle plate”, which is convenient for the adjustment and maintenance of the cleaning device and nozzle, and the vehicle has good passability when transferring.
4. An automatic clutch is provided between the auxiliary engine and the fan to ensure that the auxiliary engine is automatically disconnected from the fan when the auxiliary engine is started and stopped at no load.
5. The sweeping plate has automatic avoidance protection function and automatic reset function when encountering obstacles. It automatically retracts when encountering obstacles, and resets automatically after crossing obstacles.
6. The rotating speed of the scanning disc is adjusted according to different cleaning conditions to ensure a good cleaning effect under various pollution conditions.
7. Adopt advanced and efficient special fan and full floating nozzle that can automatically level the ground with the road surface, good cleaning effect and long service life.

Dongfeng 12 cubic road sweeper vehicle description:

1. Dongfeng second-class chassis, cab with forward turn, direction assist, 9.00R20 steel tire, equipped with Cummins 180 horsepower engine, low fuel consumption.
2. The auxiliary engine uses a powerful Cummins 140 horsepower engine.
3. The automatic clutch drives the fan to reduce the impact on the engine when the fan starts and stops. The clutch has the advantages of high wear resistance, long service life, low noise, low fuel consumption and cost savings during use.
4. Using Luoyang brand company, Beibo Taixin high-power wear-resistant maintenance-free centrifugal fan, no noise, high efficiency, large air volume and long service life.
5. The clean water tank makes full use of the vehicle space, with a volume of 4m3, and a built-in water level alarm. The water tank is treated with anti-corrosion, rust, and anti-virus treatment to make the pump run more safely and ensure the cleaning efficiency.
6. The dustbin adopts a double-layer inner stainless steel structure with a volume of 8m3. An internal filter screen is installed to effectively prevent light objects such as leaves and plastic bags from clogging the air outlet and the discharge of dust. The built-in spray dust device maximizes the use of space in the dustbin to load garbage. The car body adopts tipping discharge.
7. The left and right vertical scanning is a single scanning plate, and the front scanning plate has an automatic avoidance function, which reduces the number of sweeping brushes and the consumption of sweeping brushes, which can reduce the use cost. The brush is equipped with a water spray device for spraying and dust reduction. The left and right vertical sweeps are controlled separately, which can realize different operation modes such as back sweep and full sweep.
8. The width of the suction mouth of the nozzle reaches 1100mm, and the total operation width is greater than 3m; 3 height-adjustable nozzle wheels can easily adjust and ensure a reasonable gap between the nozzle and the road surface, so as to achieve better suction effect higher efficiency.
9. The manual hydraulic system of the driver's cab drives the left and right vertical sweeps, lifts the left and right sweeps, rotates the suction nozzles, opens and closes the rear door of the bin, and resets the bin by tilting and resetting.
10. The sweeping plate cycloid motor adopts well-known domestic brands, with long service life, stable and reliable, and low failure rate.
11. The hydraulic pipeline adopts the German standard technology sealing structure, which has good anti-vibration performance, high sealing reliability, and can achieve a leak-free sealing effect.
12, using high-quality hydraulic Huade solenoid valve group, two-way operation buttons, key electrical control components using German Siemens electrical switches, high reliability and long service life.
13. The hydraulic components are integrated and superimposed, and the electro-hydraulic centralized control of the cab is convenient for operation.
14. Install a manual pump emergency system, which can also lift the trash can when the auxiliary engine is stopped, which is convenient for maintenance.
15. The rear uses LED arrow light warning lights to ensure driving safety.
16. Non-stainless steel parts are durable due to anti-rust treatment by electrophoresis.
17. The sub-frame load-bearing beam is welded by square steel with a section length of 120mm, width of 60mm, and thickness of 8mm, which ensures the safety of the vehicle and makes the vehicle safer.
18. Computer appearance design, high side skirt, curved surface transition, overall coordination and symmetry. Achieve low fuel consumption, low noise, and streamlined design.
19. The vehicle can be equipped with snow shovel, lifting platform and anti-aircraft gun according to customer needs. Make full use of space to achieve multiple uses for one vehicle.

Dongfeng 4x2 12CBM Road sweeper Trucks

Send message to us